White Oak Quartered Flakey Heavy Flake Figured Tiger wood veneer 48" x 48" x 1/40" thickness with paper backer. This is AAA rated (scale A-AA-AAA) because of the amount of flake or pattern in each sheet. Photos are representative and actual product will vary, but is expected to be of this quality. Some photos may show other sizes, customer projects using similar veneer, or wet or finished product. In the darker photos, the customer used raw wood and the matches are random plank not book matched like these will be. Product is unfinished veneer that is book matched. Trust the experience, knowledge, and reputation that has served the wood industry since 1995. Other sizes and unbacked veneer may be available. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pre